## Ncert Solutions of Physics Part 2 for Chapter 5 : Nuclei

### Exercise : Solutions of Questions on Page Number : 462

Q1 :
(a) Two stable isotopes of lithium  and have respective abundances of 7.5% and 92.5%. These isotopes have masses 6.01512 u and 7.01600 u, respectively. Find the atomic mass of lithium.
(b) Boron has two stable isotopes, and. Their respective masses are 10.01294 u and 11.00931 u, and the atomic mass of boron is 10.811 u. Find the abundances of  and .

(a) Mass of lithium isotope , m1= 6.01512 u
Mass of lithium isotope , m2= 7.01600 u
Abundance of , ÃŽÂ·1= 7.5%
Abundance of , ÃŽÂ·2= 92.5%
The atomic mass of lithium atom is given as:
(b) Mass of boron isotope , m1= 10.01294 u
Mass of boron isotope , m2= 11.00931 u
Abundance of , ÃŽÂ·1= x%
Abundance of , ÃŽÂ·2= (100 - x)%
Atomic mass of boron, m= 10.811 u
The atomic mass of boron atom is given as:
And 100 - x= 80.11%
Hence,the abundance of  is 19.89% and that of is 80.11%.
Q2 :  The three stable isotopes of neon:

Atomic mass of , m1= 19.99 u
Abundance of , ÃŽÂ·1 = 90.51%
Atomic mass of ,m2 = 20.99 u
Abundance of , ÃŽÂ·2 = 0.27%
Atomic mass of , m3 = 21.99 u
Abundance of , ÃŽÂ·3= 9.22%
The average atomic mass of neon is given as:
Q3 :  Obtain the binding energy (in MeV) of a nitrogen

Atomic mass of nitrogen, m = 14.00307 u
A nucleus of nitrogen  contains 7 protons and 7 neutrons.
Hence, the mass defect of this nucleus, Δm = 7mH+ 7mn - m
Where,
Mass of a proton, mH= 1.007825 u
Mass of a neutron, mn= 1.008665 u
∴Δm= 7 × 1.007825 + 7 × 1.008665 - 14.00307
= 7.054775 + 7.06055 - 14.00307
= 0.11236 u
But 1 u = 931.5 MeV/c2
Δm = 0.11236 × 931.5 MeV/c2
Hence, the binding energy of the nucleus is given as:
Eb= Δmc2
Where,
c= Speed of light
Eb = 0.11236 × 931.5
= 104.66334 MeV
Hence, the binding energy of a nitrogen nucleus is 104.66334 MeV.
Q4 :
Obtain the binding energy of the nuclei  and in units of MeV from the following data:
= 55.934939 u = 208.980388 u

Atomicmass of, m1= 55.934939 u
nucleus has 26 protons and (56 - 26) = 30 neutrons
Hence, the mass defect of the nucleus, Δm = 26 × mH+ 30 × mn - m1
Where,
Mass of a proton, mH= 1.007825 u
Mass of a neutron, mn= 1.008665 u
∴Δm = 26 × 1.007825 + 30 × 1.008665 - 55.934939
= 26.20345 + 30.25995 - 55.934939
= 0.528461 u
But 1 u = 931.5 MeV/c2
∴Δm = 0.528461 × 931.5 MeV/c2
The binding energy of this nucleus is given as:
Eb1= Δmc2
Where,
c= Speed of light
Eb1= 0.528461 × 931.5
= 492.26 MeV
Average binding energy per nucleon
Atomic mass of, m2= 208.980388 u
nucleus has 83 protons and (209 - 83) 126 neutrons.
Hence, the mass defect of this nucleus is given as:
Δm' = 83 × mH+ 126 × mn - m2
Where,
Mass of a proton, mH= 1.007825 u
Mass of a neutron, mn= 1.008665 u
∴Δm' = 83 × 1.007825 + 126 × 1.008665 - 208.980388
= 83.649475 + 127.091790 - 208.980388
= 1.760877 u
But 1 u = 931.5 MeV/c2
∴Δm' = 1.760877 × 931.5 MeV/c2
Hence, the binding energy of this nucleus is given as:
Eb2= Δm'c2
= 1.760877 × 931.5
= 1640.26 MeV
Average bindingenergy per nucleon =
Q5 :  A given coin has a mass of 3.0 g. Calculate the nuclear energy that would be required to separate all the neutrons and protons from each other. For simplicity assume that the coin is entirely made of

Mass of a copper coin, m' = 3 g
Atomic mass of atom, m = 62.92960 u
The total number of atoms in the coin
Where,
NA= Avogadro's number = 6.023 × 1023atoms /g
Mass number = 63 g
nucleus has 29 protons and (63 - 29) 34 neutrons
Mass defect of this nucleus, Δm' = 29 × mH+ 34 × mn - m
Where,
Mass of a proton, mH= 1.007825 u
Mass of a neutron, mn= 1.008665 u
∴Δm' = 29 × 1.007825 + 34 × 1.008665 - 62.9296
= 0.591935 u
Mass defect of all the atoms present in the coin, Δm= 0.591935 × 2.868 × 1022
= 1.69766958 × 1022u
But 1 u = 931.5 MeV/c2
∴Δm = 1.69766958 × 1022× 931.5 MeV/c2
Hence, the binding energy of the nuclei of the coin is given as:
Eb= Δmc2
= 1.69766958 × 1022× 931.5
= 1.581 × 1025 MeV
But 1 MeV = 1.6 × 10 - 13J
Eb= 1.581 × 1025 × 1.6 × 10 - 13
= 2.5296 × 1012J
Thismuch energy is required to separate all the neutrons and protons from the given coin.
Q6 :
Write nuclear reaction equations for
(i) α-decay of  (ii) α-decay of
(iii) ÃŽÂ² - -decay of  (iv) ÃŽÂ² - -decay of
(v) ÃŽÂ²+-decay of  (vi) ÃŽÂ²+-decay of
(vii) Electron capture of

α is a nucleus of helium and ÃŽÂ²is an electron (e - for ÃŽÂ² - and e+for ÃŽÂ²+). In every α-decay, there is a loss of 2 protons and 4 neutrons. In every ÃŽÂ²+-decay, there is a loss of 1 proton and a neutrino is emitted from the nucleus. In every ÃŽÂ² - -decay, there is a gain of 1 proton and an antineutrino is emitted from the nucleus.
For the given cases, the various nuclear reactions can be written as:
Q7 :  A radioactive isotope has a half-life of

Half-life of the radioactive isotope = Tyears
Original amount of the radioactive isotope = N0
(a) After decay, the amount of the radioactive isotope = N
It is given that only 3.125% of N0 remains after decay. Hence, we can write:
Where,
ÃŽÂ» = Decay constant
t= Time
Hence, the isotope will take about 5Tyears to reduce to 3.125% of its original value.
(b) After decay, the amount of the radioactive isotope = N
It is given that only 1% of N0 remains after decay. Hence, we can write:
Since, ÃŽÂ»= 0.693/T
Hence, the isotope will take about 6.645Tyears to reduce to 1% of its original value.
Q8 :  The normal activity of living carbon-containing matter is found to be about 15 decays per minute for every gram of carbon. This activity arises from the small proportion of radioactive

Decay rate of living carbon-containing matter, R= 15 decay/min
Let N be the number of radioactive atoms present in a normal carbon- containing matter.
Half life of= 5730 years
The decay rate of the specimen obtained from the Mohenjodaro site:
R' = 9 decays/min
Let N' be the number of radioactive atoms present in the specimen during the Mohenjodaro period.
Therefore, we can relate the decay constant, ÃŽÂ»and time, tas:
Hence, the approximate age of the Indus-Valley civilisation is 4223.5 years.
Q9 :  Obtain the amount of

The strength of the radioactive source is given as:
Where,
N= Required number of atoms
Half-life of = 5.3 years
= 5.3 × 365 × 24 × 60 × 60
= 1.67 × 108s
For decay constant ÃŽÂ», we have the rate of decay as:
Where, ÃŽÂ»
For:
Mass of 6.023 × 1023 (Avogadro's number) atoms = 60 g
Mass of atoms
Hence,the amount of  necessary for the purpose is 7.106 × 10 - 6g.
Q10 :  The half-life of

Half life of = 28 years
= 28 × 365 × 24 × 60 × 60
= 8.83 × 108s
Mass of the isotope, m= 15 mg
90 g of atom contains 6.023 × 1023 (Avogadro's number) atoms.
Therefore, 15 mg of  contains:
Rate of disintegration,
Where,
ÃŽÂ» = Decay constant
Hence, the disintegration rate of 15 mg of the given isotope is
7.878 × 10
10atoms/s.
Q11 :  Obtain approximately the ratio of the nuclear radii of the gold isotope

Nuclear radius of the gold isotope = RAu
Nuclear radius of the silver isotope = RAg
Mass number of gold, AAu= 197
Mass number of silver, AAg= 107
The ratio of the radii of the two nuclei is related with their mass numbers as:
Hence, the ratio of the nuclear radii of the gold and silver isotopes is about 1.23.
Q12 :
Find the Q-value and the kinetic energy of the emitted α-particle in the α-decay of (a) and (b).
Given = 226.02540 u, = 222.01750 u,
= 220.01137 u, = 216.00189 u.

(a) Alpha particle decay of emits a helium nucleus. As a result, its mass number reduces to (226 - 4) 222 and its atomic number reduces to (88 - 2) 86. This is shown in the following nuclear reaction.
Q-value of
emitted α-particle = (Sum of initial mass - Sum of final mass) c2
Where,
c= Speed of light
It is given that:
Q-value = [226.02540 - (222.01750 + 4.002603)] u c2
= 0.005297 u
c2
But 1 u = 931.5 MeV/c2
Q= 0.005297 × 931.5 Ã¢â€°Ë†4.94 MeV
Kinetic energy of the α-particle
(b) Alpha particle decay of  is shown by the following nuclear reaction.
It is given that:
Mass of = 220.01137 u
Mass of = 216.00189 u
Q-value =
Ã¢â€°Ë† 641 MeV
Kinetic energy of the α-particle
= 6.29 MeV
Q13 :
The radionuclide 11C decays according to
The maximum energy of the emitted positron is 0.960 MeV.
Given the mass values:
calculate Q and compare it with the maximum energy of the positron emitted

The given nuclear reaction is:
Atomic mass of = 11.011434 u
Atomic mass of
Maximum energy possessed by the emitted positron = 0.960 MeV
The change in the Q-value (ΔQ) of the nuclear masses of the  nucleus is given as:
Where,
me= Mass of an electron or positron = 0.000548 u
c = Speed of light
m' = Respective nuclear masses
If atomic masses are used instead of nuclear masses, then we have to add 6 mein the case ofand 5 me in the case of.
Hence, equation (1) reduces to:
∴ΔQ= [11.011434 - 11.009305 - 2 ×0.000548] c2
= (0.001033 c2) u
But 1 u = 931.5 Mev/c2
∴ΔQ= 0.001033 ×931.5 Ã¢â€°Ë†0.962 MeV
The value of Qis almost comparable to the maximum energy of the emitted positron.
Q14 :
The nucleus decays byemission. Write down the decay equation and determine the maximum kinetic energy of the electrons emitted. Given that:
= 22.994466 u
= 22.989770 u.

In  emission, the number of protons increases by 1, and one electron and an antineutrino are emitted from the parent nucleus.
emission of the nucleus  is given as:
It is given that:
Atomic mass of = 22.994466 u
Atomic mass of = 22.989770 u
Mass of an electron, me = 0.000548 u
Q-value of the given reaction is given as:
There are 10 electrons in  and 11 electrons in. Hence, the mass of the electron is cancelled in the Q-value equation.
The daughter nucleus is too heavy as compared to and . Hence, it carries negligible energy. The kinetic energy of the antineutrino is nearly zero. Hence, the maximum kinetic energy of the emitted electrons is almost equal to the Q-value, i.e., 4.374 MeV.
Q15 :
The Q value of a nuclear reaction A + b Ã¢â€ ’ C + d is defined by
Q = [ mA+ mb - mC - md]c2 where the masses refer to the respective nuclei. Determine from the given data the Q-value of the following reactions and state whether the reactions are exothermic or endothermic.
(i)
(ii)
Atomic masses are given to be

(i) The given nuclear reaction is:
It is given that:
Atomic mass
Atomic mass
Atomic mass
According to the question, the Q-value of the reaction can be written as:
The negativeQ-value of the reaction shows that the reaction is endothermic.
(ii) The given nuclear reaction is:
It is given that:
Atomic mass of
Atomic mass of
Atomic mass of
The Q-value of this reaction is given as:
The positive Q-value of the reaction shows that the reaction is exothermic.
Q16 :  Suppose, we think of fission of a

The fission of can be given as:
It is given that:
Atomic mass of  = 55.93494 u
Atomic mass of
The Q-value of this nuclear reaction is given as:
The Q-value of the fission is negative. Therefore, the fission is not possible energetically. For an energetically-possible fission reaction, the Q-value must be positive.
Q17 :
The fission properties of are very similar to those of.
The average energy released per fission is 180 MeV. How much energy, in MeV, is released if all the atoms in 1 kg of pure undergo fission?

Average energy released per fission of
Amount of pure,m = 1 kg = 1000 g
NA= Avogadro number = 6.023 ×1023
Mass number of= 239 g
1 mole of contains NAatoms.
mg of contains
Total energy released during the fission of 1 kg ofis calculated as:
Hence,  is released if all the atoms in 1 kg of pure undergo fission.
Q18 :  A 1000 MW fission reactor consumes half of its fuel in 5.00 y. How much

Half life of the fuel of the fission reactor, years
= 5 × 365 × 24 × 60 × 60 s
We know that in the fission of 1 g of nucleus, the energy released is equal to 200 MeV.
1 mole, i.e., 235 g of contains 6.023 ×1023atoms.
1 g  contains
The total energy generated per gram ofis calculated as:
The reactor operates only 80% of the time.
Hence, the amount of consumed in 5 years by the 1000 MW fission reactor is calculated as:
Initial amount of = 2 ×1538 = 3076 kg
Q19 :
How long can an electric lamp of 100W be kept glowing by fusion of 2.0 kg of deuterium? Take the fusion reaction as

The given fusion reaction is:
Amount of deuterium, m= 2 kg
1 mole, i.e., 2 g of deuterium contains 6.023 ×1023atoms.
2.0 kg of deuterium contains
It can be inferred from the given reaction that when two atoms of deuterium fuse, 3.27 MeV energy is released.
Total energy per nucleus released in the fusion reaction:
Power of the electric lamp, P= 100 W = 100 J/s
Hence, the energy consumed by the lamp per second = 100 J
The total time for which the electric lamp will glow is calculated as:
Q20 :
Calculate the height of the potential barrier for a head on collision of two deuterons. (Hint: The height of the potential barrier is given by the Coulomb repulsion between the two deuterons when they just touch each other. Assume that they can be taken as hard spheres of radius 2.0 fm.)

When two deuterons collide head-on, the distance between their centres,d is given as:
Radius of a deuteron nucleus = 2 fm = 2 ×10 - 15m
d= 2 ×10 - 15+ 2 ×10 - 15 = 4 ×10 - 15m
Charge on a deuteron nucleus = Charge on an electron = e= 1.6 ×10 - 19C
Potential energy of the two-deuteron system:
Where,
= Permittivity of free space
Hence, the height of the potential barrier of the two-deuteron system is
360 keV.
Q21 :  From the relation

We have the expression for nuclear radius as:
R = R0A1/3
Where,
R0= Constant.
A= Mass number of the nucleus
Nuclear matter density,
Let m be the average mass of the nucleus.
Hence, mass of the nucleus = mA
Hence, the nuclear matter density is independent of A. It is nearly constant.
Q22 :
For the (positron) emission from a nucleus, there is another competing process known as electron capture (electron from an inner orbit, say, the K - shell, is captured by the nucleus and a neutrino is emitted).
Show that if emission is energetically allowed, electron capture is necessarily allowed but not vice - versa.

Let the amount of energy released during the electron capture process be Q1. The nuclear reaction can be written as:
Let the amount of energy released during the positron capture process be Q2. The nuclear reaction can be written as:
= Nuclear mass of
= Nuclear mass of
= Atomic mass of
= Atomic mass of
me= Mass of an electron
c = Speed of light
Q-value of the electron capture reaction is given as:
Q-value of the positron capture reaction is given as:
It can be inferred that if Q2> 0, then Q1 > 0; Also, if Q1> 0, it does not necessarily mean that Q2> 0.
In other words, this means that ifemission is energetically allowed, then the electron capture process is necessarily allowed, but not vice-versa. This is because the Q-value must be positive for an energetically-allowed nuclear reaction.
Q23 :  I

Average atomic mass of magnesium, m= 24.312 u
Mass of magnesium isotope, m1= 23.98504 u
Mass of magnesium isotope,m2 = 24.98584 u
Mass of magnesium isotope,m3 = 25.98259 u
Abundance of, ÃŽÂ·1= 78.99%
Abundance of, ÃŽÂ·2 = x%
Hence, abundance of, ÃŽÂ·3 = 100 - x - 78.99% = (21.01 - x)%
We have the relation for the average atomic mass as:
Hence, the abundance of is 9.3% and that of is 11.71%.
Q24 :
The neutron separation energy is defined as the energy required to remove a neutron from the nucleus. Obtain the neutron separation energies of the nuclei and from the following data:
= 39.962591 u
) = 40.962278 u
= 25.986895 u
) = 26.981541 u

For
For
A neutron is removed from a nucleus. The corresponding nuclear reaction can be written as:
It is given that:
Mass = 39.962591 u
Mass) = 40.962278 u
Mass = 1.008665 u
The mass defect of this reaction is given as:
Δm
∴Δm= 0.008978 × 931.5 MeV/c2
Hence, the energy required for neutron removal is calculated as:
For, the neutron removal reaction can be written as:
It is given that:
Mass = 26.981541 u
Mass = 25.986895 u
The mass defect of this reaction is given as:
Hence, the energy required for neutron removal is calculated as:
Q25 :  A source contains two phosphorous radio nuclides

Half life of, T1/2 = 14.3 days
Half life of, T'1/2= 25.3 days
nucleus decay is 10% of the total amount of decay.
The source has initially 10% of nucleus and 90% of nucleus.
Suppose after tdays, the source has 10% of nucleus and 90% of  nucleus.
Initially:
Number of nucleus = N
Number of nucleus = 9 N
Finally:
Number of
Number of
For nucleus, we can write the number ratio as:
For, we can write the number ratio as:
On dividing equation (1) by equation (2), we get:
Hence, it will take about 208.5 days for 90% decay of .
Q26 :
Under certain circumstances, a nucleus can decay by emitting a particle more massive than an α-particle. Consider the following decay processes:
Calculate the Q-values for these decays and determine that both are energetically allowed.

Take a  emission nuclear reaction:
We know that:
Mass of m1= 223.01850 u
Mass of m2= 208.98107 u
Mass of, m3= 14.00324 u
Hence, the Q-value of the reaction is given as:
Q= (m1 - m2 - m3) c2
= (223.01850 - 208.98107 - 14.00324) c2
= (0.03419 c2) u
But 1 u = 931.5 MeV/c2
Q= 0.03419 × 931.5
= 31.848 MeV
Hence, the Q-value of the nuclear reaction is 31.848 MeV. Since the value is positive, the reaction is energetically allowed.
Now take a emission nuclear reaction:
We know that:
Mass of m1= 223.01850
Mass of m2= 219.00948
Mass of, m3= 4.00260
Q-value of this nuclear reaction is given as:
Q= (m1 - m2 - m3) c2
= (223.01850 - 219.00948 - 4.00260) C2
= (0.00642 c2) u
= 0.00642 × 931.5 = 5.98 MeV
Hence, the Qvalue of the second nuclear reaction is 5.98 MeV. Since the value is positive, the reaction is energetically allowed.
Q27 :
Consider the fission of by fast neutrons. In one fission event, no neutrons are emitted and the final end products, after the beta decay of the primary fragments, are  and. Calculate Q for this fission process. The relevant atomic and particle masses are
m =238.05079 u
m =139.90543 u
m = 98.90594 u

In the fission of, 10 ÃŽÂ² - particles decay from the parent nucleus. The nuclear reaction can be written as:
It is given that:
Mass of a nucleusm1 = 238.05079 u
Mass of a nucleus m2 = 139.90543 u
Mass of a nucleusm3 = 98.90594 u
Mass of a neutronm4 = 1.008665 u
Q-value of the above equation,
Where,
m' = Represents the corresponding atomic masses of the nuclei
m1 - 92me
m2 - 58me
m3 - 44me
m4
Hence, the Q-value of the fission process is 231.007 MeV.
Q28 :
Consider the D - T reaction (deuterium - tritium fusion)
(a) Calculate the energy released in MeV in this reaction from the data:
= 2.014102 u
= 3.016049 u
(b)Consider the radius of both deuterium and tritium to be approximately 2.0 fm. What is the kinetic energy needed to overcome the coulomb repulsion between the two nuclei? To what temperature must the gas be heated to initiate the reaction? (Hint: Kinetic energy required for one fusion event =average thermal kinetic energy available with the interacting particles = 2(3kT/2); k = Boltzman's constant, T = absolute temperature.)

(a) Take the D-T nuclear reaction:
It is given that:
Mass of, m1= 2.014102 u
Mass of,m2 = 3.016049 u
Mass ofm3 = 4.002603 u
Mass of, m4 = 1.008665 u
Q-value of the given D-T reaction is:
Q= [m1 + m2 - m3 - m4] c2
= [2.014102 + 3.016049 - 4.002603 - 1.008665] c2
= [0.018883 c2] u
But 1 u = 931.5 MeV/c2
Q= 0.018883 × 931.5 = 17.59 MeV
(b) Radius of deuterium and tritium, r Ã¢â€°Ë†2.0 fm = 2 × 10 - 15m
Distance between the two nuclei at the moment when they touch each other, d = r + r = 4 × 10 - 15m
Charge on the deuterium nucleus = e
Charge on the tritium nucleus = e
Hence, the repulsive potential energy between the two nuclei is given as:
Where,
0= Permittivity of free space
Hence, 5.76 × 10 - 14J or of kinetic energy (KE) is needed to overcome the Coulomb repulsion between the two nuclei.
However,it is given that:
KE
Where,
k= Boltzmann constant = 1.38 × 10 - 23m2 kg s - 2K - 1
T = Temperature required for triggering the reaction
Hence, the gas must be heated to a temperature of 1.39 × 109K to initiate the reaction.
Q29 :  Calculate and compare the energy released by a) fusion of 1.0 kg of hydrogen deep within Sun and b) the fission of 1.0 kg of

(a) Amount of hydrogen, m= 1 kg = 1000 g
1 mole, i.e., 1 g of hydrogen () contains 6.023 × 1023atoms.
1000 g of  contains 6.023 × 1023× 1000 atoms.
Within the sun, four  nuclei combine and form one  nucleus. In this process 26 MeV of energy is released.
Hence, the energy released from the fusion of 1 kg is:
(b) Amount of  = 1 kg = 1000 g
1mole, i.e., 235 g of  contains 6.023 × 1023atoms.
1000 g ofcontains
It is known that the amount of energy released in the fission of one atom of is 200 MeV.
Hence, energy released from the fission of 1 kg of  is:
∴
Therefore, the energy released in the fusion of 1 kg of hydrogen is nearly 8 times the energy released in the fission of 1 kg of uranium.
Q30 :  Suppose India had a target of producing by 2020 AD, 200,000 MW of electric power, ten percent of which was to be obtained from nuclear power plants. Suppose we are given that, on an average, the efficiency of utilization (i.e. conversion to electric energy) of thermal energy produced in a reactor was 25%. How much amount of fissionable uranium would our country need per year by 2020? Take the heat energy per fission of

Amount of electric power to be generated, P= 2 × 105MW
10% of this amount has to be obtained from nuclear power plants.
Amount of nuclear power,
= 2 × 104MW
= 2 × 104× 106J/s
= 2 × 1010× 60 × 60 × 24 × 365 J/y
Heat energy released per fission of a 235U nucleus, E= 200 MeV
Efficiency of a reactor = 25%
Hence, the amount of energy converted into the electrical energy per fission is calculated as:
Number of atoms required for fission per year:
1 mole, i.e., 235 g of U235contains 6.023 × 1023atoms.
Mass of 6.023 × 1023atoms of U235 = 235 g = 235 × 10 - 3kg
Mass of 78840 × 1024atoms of U235
Hence, the mass of uranium needed per year is 3.076 × 104kg.

<< Back to NCERT/CBSE Notes